Smoked or Red Aftermarket F1 Overlay - 2020+ Supra

• Vinyl overlays for the OLM F1 / rear lamps on the 2020+ Toyota GR Supra (A90) — also fits any aftermarket brake lamp with a flat lens
• 3 options: Dark Smoke, Light Smoke, Red
• Light smoke is approximately half as dark as dark smoke
• Built-in air egress channels — prevents air bubble trapping during install
• Every material allows ample light to pass through — not a blackout
• Made and cut in the USA

Smoke or Tint Your Supra F1 Lamps — Standard Finishes

If you have the OLM aftermarket F1-style rear lamps on your 2020+ Toyota GR Supra A90 and want to darken or tint the lens, these are the straightforward options. Dark Smoke for a blacked-out look, Light Smoke (approximately half as dark) for a subtle tint, or Red to change the lens color entirely. These also fit any other aftermarket brake lamp with a flat lens — not just OLM. Every option allows full light transmission — these are tint overlays, not blackouts.

For more premium specialty textures (Carbon Fiber, Honeycomb, Stealth), see the Special Edition version.

Overlay Options

• Dark Smoke — deep dark tint, clean and stealthy
• Light Smoke — approximately half as dark as dark smoke; subtle tint with minimal visual change
• Red — changes the lens to a red tint; striking color shift

Installation

1. Clean the lens surface thoroughly — remove all dirt, debris, and wax residue
2. Mix one drop of dish soap with a cup of water
3. Mist the adhesive side of the vinyl and the lens surface with the soapy water mixture
4. Center the overlay and slowly press from the center while keeping the ends lifted
5. Once you are confident in the alignment, push air and water out from center to edges
6. Use a hair dryer to dry the soapy water — this dramatically increases adhesion once dry

Fitment

Designed for the OLM aftermarket F1-style rear lamps for the 2020+ Toyota GR Supra A90. Also fits any aftermarket brake lamp with a flat lens. Not designed for factory Supra tail lights.

FAQ

How dark is Light Smoke compared to Dark Smoke?
Light smoke is approximately half as dark. If you want a subtle tint that's barely noticeable in daylight but visible at night, Light Smoke is the one. Dark Smoke is a significant tint that noticeably darkens the lens appearance.

Will these work on my non-OLM aftermarket lamps?
Yes — these fit any aftermarket brake lamp with a flat lens, not just OLM. If your aftermarket lamp has a curved or compound-curve lens surface, check the fit before committing.

Do these block light output?
No — all three options allow ample light to pass through. They tint or color the lens without blocking brake light or turn signal function.

Do these work on factory Supra lights?
No — these are cut for aftermarket lamp dimensions. The factory tail light lens shape is different and these will not fit correctly.